Skip to main content

Power Factor (PF) Calculator


Power Factor Calculator

Circuit
RMS current (amps)
RMS voltage (volts)
Real power P (watts)
Power Factor




The presented calculation is conducted using the basic formula PF=P/S, where P - watts, S=V×I - volt-amperes. Having said that, a 3-PH circuit demands an added clarification.

Typically, we must add together "P" and "S" values coming from all phases, where SPH=VPH×IPH.

Precisely what needlessly complicate things is the fact that Wye setup is normally seen by its line-to-line voltage, which can be VL-L= √3×VPH.

Alternatively, with regard to delta we normally recognize line current, that is ILINE=√3×Iph.

Thankfully, for well balanced loads in either cases the whole apparent power could be referred to by the very same equation: S=3×Vph×Iph=√3×VL-L×IL .

For that reason in order to avoid misunderstandings and to work with a well-known technique, for 3ph configuration our software employs line voltages and currents: that is certainly what you must enter into specific fields (boxes) pertaining to RMS volts and amps.








Need Help? Please leave a comment, I'll get back soon with a reply!

Comments