Skip to main content

How to Make an Interesting Random LED Flasher Circuit for Decorating a Christmas Tree

The article explains a simple random LED flasher circuit which can eb used fo decorating Chrstmas trees or other similar items during festivals.

How the Circuit Functions


I have already discussed a few interesting applications of the IC 4060 as an oscillator for driving clock input ICs like 4017 and also as a timer for producing variable time delays, ranging from a few seconds to many hours.

The oscillator function of the IC can also be effectively employed for driving colorful LEDs and for creating interesting LED light show. The idea can be used for illuminating vehicles, houses and typically Christmas trees during Christmas.

As discussed in one of my previous articles regarding the use of the IC as an oscillator, here the IC is set up as an oscillator for generating the required oscillations or clock signals at the different outputs.

Since the IC is able to generate clock signals or square waves through all its outputs, every output from the IC can be effectively used for displaying interesting LED light flashing with different rates of frequency.

The oscillations generated at the outputs of the IC increment with multiples of two or in other words they just double with their frequency across all the outputs at a specified pin out order.

Therefore some pin out LEDs may flash at very high rates while some may flash at very slow rates while still other may flash at intermediate rates, each LED chain having its own specific flashing rate.

The entire light show presented by the configuration thus creates an intriguing effect which can be very eye-catching.

random LED light pattern generator circuit using IC 4060


The figure shows rather simple wiring where the IC itself acts as an oscillator as well as the LED driver.

Each of its output is wired into a string of colorful LEDs which may be set up or arranged in any desired format for acquiring the most interesting lighting effects.

The pot may be used for optimizing the flashing of the LEDs to the desired levels or at the rate which might suit the particular decorative application the most.

The circuit should be operated with voltages above 12 or precisely speaking, the applied voltage should be ideally fixed at 15 volts (regulated).

This typically high voltage enables many LEDs to be connected across each input, four to five LEDs to be exact.

Since so many LEDs are involved the power rating the transformer needs to be at least 500 mA.

The whole circuit may be enclosed inside a plastic box with strings of LEDs terminating out of the box so that they may attached to any desired structure like the Christmas tree.

Need Help? Please leave a comment, I'll get back soon with a reply!




Comments

  1. Can we increase the no.of led to 50 each

    ReplyDelete
  2. you will need transistor driver stages for that, on each channel.

    ReplyDelete

Post a Comment